跳到主要內容區塊

中國文化大學 - 資訊工程學系

Welcome to Department of Computer Science and Information Engineering
繁體

洪敏雄老師網頁

 洪敏雄教授 經歷服務與榮譽開授課程著作目錄專利研究計畫

描述: http://iecs.pccu.edu.tw/ezfiles/130/1130/img/164/image002.jpg

英文姓名

 Hung, Min-Hsiung

連絡電話

 +886-2-2861-0511 ext. 33501 (教研室)

E-mail信箱

 hmx4@faculty.pccu.edu.tw   or  hungmh1@gmail.com   

教研室位置

 大義 709

Office Hours

 星期一:11:00-12:00    15:00-16:00

 星期二:10:00~12:00    15:00~16:00

 星期四:11:00~12:00

研究領域

 產業自動化與智慧製造

 雲端運算應用系統

 物聯網與行動裝置應用系統

 單晶片控制與嵌入式系統

 機器人控制與模擬

                                     

學 歷 (Education)

美國俄亥俄州立大學

(The Ohio State University)

電機工程研究所博士

經歷 (Experiences)

中國文化大學 資訊工程學系 教授兼系主任
中國文化大學 資訊工程學系 教授

國防大學理工學院

國防科學研究所

教授兼任所長

國防大學理工學院

電機電子工程學系

教授兼任系主任

中正理工學院

電機工程學系

講師、副教授、教授

服務與榮譽 (Services and Honors)

 

1. 中華民國自動化科技學會(永久會員)

2. 晉升為IEEE資深會員 (Senior Member) (2006/11)

3. 社團法人中華民國國防科技學術研究學會(永久會員)

4. 榮登於Marquis Who's Who in Science and Engineering 10th Anniversary Edition (2007/12)

5. 擔任96年國科會自動化學門重點推動領域「智慧型製造系統」規劃委員

6. 擔任99年國科會自動化學門重點推動領域「雲端運算應用研究領域」規劃委員

7. 擔任97-99年國科會自動化學門研究計畫複審委員

8. 榮獲第16屆全國自動化科技研討會 自動化最佳論文入圍獎(2008/6)

9. 榮獲第10屆自動化科技國際研討會(Automation 2009) 最佳論文獎(Best Paper Award)(2009/6)

10.榮獲第18屆全國自動化科技研討會 自動化最佳論文佳作獎(2010/6)

11.擔任中正嶺學報(EI)總編輯 (2009/09~2010/07)

12.擔任華岡工程學報編輯委員會主任委員(2010/9~2012/8)

13.擔任自動化科技學會會刊客座編輯 (2011/3)

14.榮獲中國文化大學99學年度績優導師

15.榮獲中國文化大學99學年度學術研究獎勵

16.榮獲中國文化大學100學年度學術研究獎勵

17.指導大學部學生參加中國文化大學資工系101年專題實作競賽榮獲第1(2012/1)

18.指導大學部學生參加中國文化大學資工系102年專題實作競賽榮獲第1(2013/1)

19.榮獲2013 IEEE機器人與自動化國際研討會(ICRA 2013) 最佳自動化論文獎(Best Automation Paper Award)(2013/5)

20.指導大學部學生參加中國文化大學工學院102年專題競賽榮獲實作組第2(2013/5)

21.指導大學部學生參加中國文化大學資工系103年專題實作競賽榮獲第3(2014/1)

22.指導大學部學生參加中國文化大學資工系103年專題實作競賽榮獲第4(2014/1)

23.指導大學部學生參加中國文化大學工學院103年專題實作競賽榮獲第2名(2014/5)

24.擔任103年科技部自動化學門重點推動領域「資訊與雲端技術應用」及「智慧製造系統」規劃委員(2014/10)

25.參與主辦2014 IEEE Conference on Automation Science and Engineering(CASE2014),擔任Finance Chair(2014/8)

26.擔任2014科技部智慧自動化前瞻研究計畫成果發表會組織及主持人(Organizer of Workshop on Advanced Intelligent Automation Technology) (2014/8)

27.榮獲103學年度中國文化大學工學院教學傑出教師(2014/12)

28.指導大學部學生參加中國文化大學資工系104年專題實作競賽榮獲第2名(2015/1)

29.榮獲103年度科技部自動化學門專題研究計畫成果發表會【計畫成果優秀海報獎】(2015/11)

30.榮獲104學年度中國文化大學校教學特優教師(2015/12)

31.指導大學部學生參加中國文化大學資工系105年專題實作競賽榮獲第3名(2016/1)

32.指導大學部學生參加中國文化大學工學院105年專題實作競賽榮獲第3名(2016/5)

33.擔任2017 IEEE自動化科學與工程國際研討會(IEEE International Conference on Automation and Engineering, CASE 2017)論文審查委員會副編輯。(2017/3-2018/5)

34.榮獲2017 IEEE自動化科學與工程國際研討會(CASE 2017) 最佳應用論文獎(Best Application Paper Award)(2017/8)

35.榮獲2018 IEEE機器人與自動化國際研討會(ICRA 2018) 最佳自動化論文決賽入圍(Best Automation Paper Award Finalist)(2018/5)

36.擔任2018 IEEE自動化科學與工程國際研討會(IEEE International Conference on Automation and Engineering, CASE 2018)論文審查委員會副編輯。(2018/3-2018/5)

37.指導大學部學生參加中國文化大學工學院107年專題實作競賽榮獲第2名(2018/5)

38.指導大學部學生參加2018【華岡創新跨域設計聯展】榮獲最佳跨域設計獎(2018/6)

39.擔任International Journal of Automation and Smart Technology (AUSMT)期刊客座編輯(Guest Editor)。(2018/6)

40.榮獲「107年國家發明創作獎-發明獎銀牌」:專利「工具機之加品質的預測方法」(2018/10)

41.擔任2019 IEEE自動化科學與工程國際研討會(IEEE International Conference on Automation and Engineering, CASE 2019)論文審查委員會副編輯。(2019/3-2019/5)

 

開授課程 (Current Teaching Courses)

科目名稱

必選修

班級

學分/小時

學期

物聯網技術與應用

選修

閩資工

3/3

107-2

基礎雲端運算程式設計

選修

資工系3A

3/3

107-2

智慧型手機程式設計

選修

資工系3B

3/3

107-2

網路式自動化 選修 資工所 3/3 107-2
智慧製造技術 選修 工學院 3/3 107-2

系統分析與設計

必修

資工系3A

3/3

108-1

單晶片系統實作

選修

資工系3B

3/3

108-1

嵌入式系統設計

選修

資工系4B

3/3

108-1

資訊訊系統專題 必修 資工系4B 2/2 108-1

 

 

著作目錄 (Publication) 

期刊論文(Journal Papers)  (*本人為通訊作者)

 

[2019] Y.-C. Chou, C.-J. Kuo, T.-T. Chen, G.-J. Horng, M.-Y. Pai, M.-E. Wu, Y.-C. Lin, M.-H. Hung, W.-T. Su, Y.-C. Chen, C.-C. Chen, and D.-C. Wang, “Deep-Learning-Based Defective Bean Inspection with GAN-Structured Automated Labeled Data Augmentation in Coffee Industry,” Applied Science, Vol. 9, Issue 19, Article 4166, pp. 1-26, October 2019. DOI:10.3390/app9194166. [SCI] 

[2019] Y.-M. Hsieh, C.-Y. Lin, Y.-R. Yang, M.-H. Hung, and F.-T. Cheng, “Automatic Virtual Metrology for Carbon Fiber Manufacturing,” IEEE Robotics and Automation Letters (RA-L), Vol. 4, No. 3, pp 2730-2737, July 2019.  

[2019] C.-C. Chen, M.-H. Hung*, B. Suryajaya, Y.-C. Lin, H.-C.Yang, H.-C. Huang, and F.-T. Cheng, “A Novel Efficient Big Data Processing Scheme for Feature Extraction in Electrical Discharge Machining,” IEEE Robotics and Automation Letters (RA-L), Vol. 4, No. 2, pp. 910-917, April 2019. 

[2019] K.-F. Lin, S.-S.g Lin, M.-H. Hung, C.-H. Kuo, and P.-N. Chen, An Embedded Gateway with Communication Extension and Backup Capabilities for ZigBee-Based Monitoring and Control Systems, Applied Sciences, Vol. 9, Issue 3, Article 456, pp. 1-18, January 2019. DOI:10.3390/app9030456 [SCI]

[2018] C.-C. ChenW.-T. Su, M.-H. Hung, and Z.-H. Lin, “Map-Reduce-style Job Offloading Using Historical Manufacturing Behavior for Edge Devices in Smart Factory,” IEEE Robotics and Automation Letters (RA-L), Vol. 3, No. 4, pp. 2918-2925, October 2018. 

[2018] C.-C. ChenM.-H. Hung*, P.-Y. Li, Y.-C. Lin,  Y-Y. Liu, and F.-T. Cheng, “A Novel Automated Construction Scheme for Efficiently Developing Cloud Manufacturing Services,” IEEE Robotics and Automation Letters (RA-L), Vol. 3, No. 3, pp. 1378-1385, July 2018. 

[2018] K.-F. Lin, S.-S. Lin, M.-H. Hung, C.-H. Kuo, and P.-N. Chen, Systematic Node Management Mechanism using ZigBee-based Real-time Vital Sign Information Monitoring System to Manage Large Numbers of Patients,” Technology and Health Care, Vol. 26, No. 1, pp. 29–41, March 2018. [SCI]

[2017] H.-C. Yang, Y.-Y. Li, M.-H. Hung, and F.-T. Cheng, “A Cyber-Physical Scheme for Predicting Tool Wear based on Hybrid Dynamic Neural Network,” Journal of the Chinese Institute of Engineers, Vol. 40, No. 7, pp. 614-625, October 2017. [SCI]

[2017] S.-S. Lin, C.-W. Lan, P.-N. Chen, M.-H. Hung, K.-H. Tan, Y.-H. Wu, and J.-Y. Nieh, Development of a Novel Power-Monitoring System Using Internet and Wireless Sensor Network Technologies, Sensors and Materials, Vol. 29, No. 7, pp. 1005-1015, 2017. [SCI].

[2017] Y.-C. Lin, M.-H. Hung*, H.-C. Huang, C.-C. Chen, H.-C Yang, Y.-S. Hsieh, and F.-T. Cheng, “Development of Advanced Manufacturing Cloud of Things (AMCoT) - A Smart Manufacturing Platform,” IEEE Robotics and Automation Letters (RA-L), Vol. 2, No. 3, pp. 1809-1816, July 2017. 

[2016] M.-H. Hung*, Y.-Y. Li, Y.-C. Lin, C.-F. Wei, and F.-T. Cheng, “Development of a Novel Cloud-based Multi-tenant  Model Creation Service for Automatic Virtual Metrology,” Robotics and Computer-Integrated Manufacturing, Vol. 44, pp. 174-189, April 2017. [SCI]  (Published on September 19, 2016)

[2016] F.-T. Cheng, H. Tieng, H.-C. Yang, M.-H. Hung, Y.-C. Lin, C.-F. Wei, and Z.-Y. Shieh, “Industry 4.1 for Wheel Machining Automation,” IEEE Robotics and Automation Letters (RA-L), Vol. 1, No. 1, pp. 332-339, January 2016

[2015] C.-C. Chen, Y.-C. Lin, M.-H. Hung, C.-Y. Lin, Y.-J. Tsai, and F.-T. Cheng, “A Novel Cloud Manufacturing Framework with Auto-Scaling Capability for Machine Tool Industry,” International Journal of Computer-Integrated Manufacturing,  Vol. 29, No. 7, pp. 786–804, 2016. [SCI] (Published on December 22, 2015) 

[2015] H.-C. Huang, Y.-C. Lin, M.-H. Hung*, C.-C. Tu, and F.-T. Cheng, “Development of Cloud-based Automatic Virtual Metrology System for Semiconductor Industry,” Robotics and Computer-Integrated Manufacturing, Vol. 34, pp. 30-43, Aug. 2015. [SCI] 

[2014] M.-H. Hung*, P.-Y. Chen, A. Y. Chang, and T.-N. Yang, “Development of a Demand-Side Power Monitoring System with Mobile Deployment Consideration,” Journal of Chung Cheng Institute of Technology, Vol. 43, No. 1, pp. 7-24, May 2014. [EI]

[2014] P.-N. Chen, S.-S. Lin, H.-H. Su, M.-H. Hung*, and L.-P. Chou, “Development of an Information-Incident Alarm System for Hierarchical Organizations,” Journal of Chung Cheng Institute of Technology, Vol. 43, No. 1, pp. 161-182, May 2014. [EI]

[2013] C.-C. Chen, M.-H. Hung, N.H.T. Giang, H.-C. Lin, and T.-C. Lin, “Design and Implement a MapReduce Framework for Executing Standalone Software Packages in Hadoop-based Distributed Environments,” Smart Science, Vol. 1, No. 2, pp. 99-107, November 2013.  
***榮獲2013全研科技論文競賽銅研獎***

[2013] A. Y. Chang, Y.-Y. Li, M.-H. Hung*, and T.-F. Yen,  “Mobile Monitoring and Control Framework with Active-Push and Plug-and-Play Capabilities,” Assembly Automation, Vol. 33, No. 4, pp. 317-333, October 2013. [SCI]

[2013] J.-Y. Cheng, S.-S. Lin, M.-H. Hung, C.-W. Chuang, and L.-P. Chou, “Development of a ZigBee-based Remote Diagnosis Scheme with High Transmission Efficiency,” Journal of Chung Cheng Institute of Technology, Vol. 42, No. 1, pp. 155-166, May 2013.  [EI]

[2012] A. Y. Chang, M.-H. Hung*, and C.-J. Chen, An Application of Object Detection and Simulated Annealing in Smart Air Conditioning,” Journal of Convergence Information Technology (JCIT), Vol. 7, No. 23, pp. 170-177, December 2012. [EI]

[2012] S.-S. Lin, M.-H. Hung*, C.-L. Tsai, and L.-P. Chou, “Development of an Ease-of-Use Remote Healthcare System Architecture using RFID and Networking Technologies,” Journal of Medical Systems, Vol. 36, Issue 6, pp. 3605-3619, December 2012.  [SCI]

[2012] M.-H. Hung*, C.-F. Chen, H.-C. Huang, H.-C. Yang, and F.-T. Cheng, “Development of an AVM System Implementation Framework,” IEEE Transactions on Semiconductor Manufacturing, Vol. 25, No. 4, pp. 598-613, November 2012.  [SCI]

[2012] J.-Y. Cheng, M.-H. Hung*, S.-S. Lin, and F.-T. Cheng, “New Remote Monitoring and Control System Architectures based on Cloud Computing,” Advanced Materials Research (AMR), Vol. 579, pp. 312-329, September 2012. [EI]

[2012] H.-C. Yang, K.-J. Liu, and M.-H. Hung, “Drill-Path Optimization with Time Limit and Thermal Protection,” Advanced Materials Research (AMR), Vol. 579, pp. 153-159, September 2012. [EI]

[2012] M.-H. Hung*, W.-H. Tsai, H.-C. Yang, Y.-J. Kao, and F.-T. Cheng, “A Novel Automatic Virtual Metrology System Architecture for TFT-LCD Industry based on Main Memory Database,” Robotics and Computer-Integrated Manufacturing, Vol. 28, No. 4, pp. 559-568, August 2012.  [SCI]

[2012] 林文生、林翰毅、洪敏雄*、楊泰寧,發展基於ZigBee無線感測網路之遠距環境監控系統,華岡工程學報,Vol. 29, pp. 119-124, June 2012

[2012] M.-H. Hung*, Y.-C. Lin, S.-H. Li, H.-C. Yang, and F.-T. Cheng, “Design and Implementation of a Data Exchange Platform for TFT-LCD Virtual Production Control Systems,” International Journal of Automation and Smart Technology (AUSMT), Vol. 2, No. 2, pp. 83-94, June 2012. (DOI: 10.5875/ausmt.v2i2.121) (ISSN: 2223-9766)

[2012] Y.-H. Chang, Y.-T. Chen, M.-H. Hung, and A.Y. Chang, “Development of an e-Operation Framework for SOPC-based Reconfigurable Applications,” International Journal of Innovative Computing, Information and Control, Vol. 8, No. 5(B), pp. 3639-3660, May 2012.  [SCI]

[2011] C.-L. Tsai and M.-H. Hung, “Intrusive Behavior Analysis Based on Dynamic Honeynet and Multidimensional Hidden Markov Model,” Journal of Chung Cheng Institute of Technology, Vol. 40, No. 1, pp. 29-42, May 2011. [EI]

[2011] P.-N. Chen, S.-S. Lin, M.-H. Hung*, and C.-L. Tsai, “Design and Implementation of a ZigBee-based Remote Monitoring and Control System for Campus Lighting Facilities,” Hua Kang Journal of Engineering Chinese Culture University, Vol. 27, pp. 132-140, January 2011. 

[2010] M.-H. Hung*, S.-W. Wu, T.-L. Wang, F.-T. Cheng, and Y.-Y. Feng, “An Efficient Data Exchange Scheme for Semiconductor Engineering Chain Management System,” Robotics and Computer-Integrated Manufacturing, Vol. 26, Issue 5, pp. 507-516, May 2010.  [SCI]

[2010] S.-S. Lin, M.-H. Hung*, and H.-C. Chiang, Development of a RFID-based Automatic Ammunition Surveillance System,” Journal of Chung Cheng Institute of Technology, Vol. 39, No. 1, pp. 79-96, May 2010. [EI] 

[2009] W. Tann, H.-J. Shaw, M.-H. Hung, S.-W. Wu, and F.-T Cheng, “Enable SOA-based Data Exchange Architecture with Interoperability for Heterogeneous Systems,” Journal of Taiwan Society of Naval Architects and Marine Engineers, Vol. 28, No. 4, pp. 207-220, November, 2009.  [EI]

[2009] J.-Y. Cheng, M.-H. Hung*, W.-L. Jian, and S.-S. Lin “Development of a Mobile Monitoring and Control Architecture Based on ZigBee and RFID Wireless Technologies,” Journal of Chung Cheng Institute of Technology, Vol. 38, No. 1, pp. 47-62, November 2009. [EI]

[2009] W.-B. Wu, P.-C. Chen, M.-H. Hung, K.-Y. Chang, and W.-J. Chang,LMI Robustly Decentralized Output Feedback Controller Design for Stochastic Large-Scale Uncertain Systems with Time-Delays,” Journal of Marine Science and Technology, Vol. 17, No. 1, pp. 42-49, 2009. [SCI]

[2009] J.-Y. Cheng, M.-H. Hung*, J.-W. Chang, and C.-L. Tsai, “Development of a Power Monitoring System with Direct Load Control Capabilities using ZigBee Technology,” Hua Kang Journal of Engineering Chinese Culture University, Vol. 23, pp. 135-148, Jan. 2009.

[2008] S.-S. Lin, M.-H. Hung*, and D.-R. Lai,Development of a RFID-based Missile Assembly and Test Management System,” Journal of Chung Cheng Institute of Technology, Vol. 37, No. 1, pp. 185-195, Nov. 2008.  [EI]

[2008] M.-H. Hung*, T.-L. Wang, F.-Y. Hsu, and F.-T. Cheng,Development of an Interface C Framework for Semiconductor e-Diagnostics Systems,” Robotics and Computer-Integrated Manufacturing, Vol. 24, Issue 3, pp. 370-383, June 2008 [SCI]

[2007] M.-H. Hung*, T.-H. Lin, F.-T. Cheng, and R.-C. Lin,A Novel Virtual Metrology Scheme for Predicting CVD Thickness in Semiconductor Manufacturing,” IEEE/ASME Transactions on Mechatronics, Vol. 12, No. 3, pp. 308-316, June 2007. [SCI]

[2007] M.-H. Hung* and J.-K. Ting,A Novel Redundancy Index for Kinematically Redundant Manipulators,” Journal of the Chinese Institute of Engineers, Vol. 30, No.1, pp. 77-90, January 2007. [SCI]

[2006] Y.-H. Chang, Y.-Y. Wang, M.-H. Hung, and P.-C. Chen, “Fuzzy-Scheduling Integral Control of Induction Servo Motor with Actuator Saturation via LMI Approach,” International Journal of Computer Applications in Technology, Vol. 27, No. 2/3, pp. 107-118, October 2006. [EI]

[2006] Y.-C. Su, F.-T. Cheng, M.-H. Hung, and H.-C. Huang, “Intelligent Prognostics System Design and Implementation,” IEEE Transactions on Semiconductor Manufacturing, Vol. 19, No. 2, pp. 195-207, May 2006.  [SCI]

[2006] Y.-C. Su, M.-H. Hung, F.-T. Cheng, and Y.-T. Chen, “A Processing Quality Prognostics Scheme for Plasma Sputtering in TFT-LCD Manufacturing,” IEEE Transactions on Semiconductor Manufacturing, Vol. 19, No. 2, pp. 183-194, May 2006.  [SCI]

[2005] Y.-H. Chang, Y.-Y. Wang, M.-H. Hung, and P.-C. Chen, “Regional Stability and Performance Control of Input-Saturated Induction Motor via LMI Approach,” Asia Journal of Control, Vol.7, No.4, pp. 368-379, December 2005. [SCI]

[2005] M.-H. Hung*, K.-Y. Chen, and S.-S Lin, “A Web-Services-based Remote Monitoring and Control System Architecture with the Capability of Protecting Appliance Safety,” Journal of Chung Cheng Institute of Technology, Vol. 34, No. 1, pp. 385-402, November 2005. [EI]

[2005] K.-Y. Chen, M.-H. Hung*, and C.-M. Wang, “A Power Monitoring Architecture with Mobile Deployment Capability,” Journal of Chung Cheng Institute of Technology, Vol. 34, No. 1, pp. 299-322, November 2005.  [EI]

[2005] Y.-H. Chang, Y.-Y. Wang, M.-H. Hung, and P.-C. Chen, “Regional Stabilizing and  Control with Actuator Saturation using Linear Matrix Inequalities,” Journal of Chung Cheng Institute of Technology, Vol. 33, No. 2, pp. 13-25, May 2005. [EI]

[2005] M.-H. Hung*, Fan-Tien Cheng, and Sze-Chien Yeh, “Development of a Web-Services-Based e-Diagnostics Framework for Semiconductor Manufacturing Industry,” IEEE Transactions on Semiconductor Manufacturing, Vol. 17, No. 5, pp. 122-135, February 2005.  [SCI]

[2005] M.-H. Hung*, F.-T. Cheng, H.-L. Lee, and D. E. Orin, “Increasing the Stability Margin of Multilegged Vehicles Through Body Sway,” Journal of the Chinese Institute of Engineers, Vol. 28, No. 1, pp. 39-54, January 2005.  [SCI]

[2004] M.-H. Hung*, K.-Y. Chen, R.-W. Ho, and Fan-Tien Cheng, “Development of an e-Diagnostics/Maintenance Framework for Semiconductor Factories with Security Considerations,” International Journal of Advanced Engineering Informatics, Vol. 17, Issues 3-4, pp. 165-178, July-October 2004.  [SCI]

[2004] M.-H. Hung*, J. Tsai, F.-T. Cheng, and H.-C.Yang, “Development of an Ethernet-Based Equipment Integration Framework for Factory Automation,” Robotics and Computer-Integrated Manufacturing, Vol. 20, Issue 5, pp. 369-383, October 2004 [SCI]

[2000] M.-H. HungD. E. Orin, and K. J. Waldron, “Efficient Formulation of the Force Distribution Equations for General Tree-Structured Robotic Mechanisms with a Mobile Base,” IEEE Trans. on Systems, Man, and Cybernetics, Part B: Cybernetics, Vol. 30, No. 4, pp. 529-538, August 2000. [SCI] 

 

研討會論文(Conference Papers)  (*本人為通訊作者)

[2019] Yu-Ming Hsieh, Chin-Yi Lin, Yu-Ru Yang, Min-Hsiung Hung, and Fan-Tien Cheng, Automatic Virtual Metrology for Carbon Fiber Manufacturing,” 2019 IEEE International Conference on Automation Science and Engineering (CASE 2019), Vancouver, Canada, August 22-26, 2019. [EI] 

[2019] Min-Hsiung Hung*, Yu-Chuan Lin, Zih-Yan Shieh, Chao-Chun Chen, Yung-Chou Kao, and Fan-Tien ChengA Rapid Construction Scheme of Intelligent Manufacturing Devices based Edge Computing and Container Technology,” 2019 IEEE International Conference on Automation Science and Engineering (CASE 2019), Vancouver, Canada, August 22-26, 2019. [EI] 

[2019] Cheng-Ju Kuo, Chao-Chun Chen, Tzu-Ting Chen, ZhiJing Tasi, Min-Hsiung Hung, Yu-Chuan Lin, Yi-Chung Chen,  A Labor-Efficient GAN-based Model Generation Scheme for Deep-Learning Defect Inspection among Dense Beans in Coffee Industry,” 2019 IEEE International Conference on Automation Science and Engineering (CASE 2019), Vancouver, Canada, pp. 263-270, August 22-26, 2019. [EI] 

[2019] Yi-Chung Chen, Sheng-Min Chiu, Cheng-Ju Kuo, Li-Chun Hung, Min-Hsiung Hung, and Chao-Chun ChenUsing Fuzzified Deep Recurrent Neural Networks to Retrieve Deep Features to Enhance the Accuracy of Tool Wear Prediction,” 2019 IEEE International Conference on Automation Science and Engineering (CASE 2019), Vancouver, Canada, August 22-26, 2019. [EI] 

[2019] 林才益、李鋒、鄭翔、洪敏雄結合人工智慧之智慧家居遠端監控系統,第15屆創新.管理.知識社群國際研討會(iCIMKC 2019),台北,台灣,2019年5月18日

[2019] 辛志雄、洪敏雄結合語音交互之智慧居家農場遠端監控系統,第15屆創新.管理.知識社群國際研討會(iCIMKC 2019),台北,台灣,2019年5月18日

[2019] C.-C. Chen, M.-H. Hung*, B. Suryajaya, Y.-C. Lin, H.-C.Yang, H.-C. Huang, and F.-T. Cheng, “A Novel Efficient Big Data Processing Scheme for Feature Extraction in Electrical Discharge Machining,” 2019 IEEE International Conference on Robotics and Automation (ICRA 2019), Montreal, Canada, May 20-24, 2019. [EI]

[2019]  C.-J. Kuo,  D.-C. Wang,  P.-X. Lee,  T.-T. Chen, G.-J. Horng, T.-H. Hsu, Z.-J. Tsai, M.-Y. Pai, G.-M. Guo, Y.-C. Lin, M.-H. Hung, and C.-C. Chen, “Quad-Partitioning-Based Robotic Arm Guidance Based on Image Data Processing with Single Inexpensive Camera For Precisely Picking Bean Defects in Coffee Industry,” The 11th Asian Conference on Intelligent Information and Database Systems (ACIIDS 2019), Yogyakarta, Indonesia, pp. 152-164 April 8–11, 2019.    ***榮獲大會最佳學生論文獎 (Best Student Paper Award)***

[2018] M.-H. Hung*,  P.-C. Lee, Y.-C. Lin, C.-C. Chen, F.-T. Cheng, and H.-C. Yang, “Automated Construction Scheme of Python-based Cloud Manufacturing Services,” The 15th International Conference on Automation Technology (Automation 2018), Taichung, Taiwan, December 6-8, 2018. 

[2018] Yu-Yang Liu, Min-Hsiung Hung*, Yu-Chuan Lin, Chao-Chun. Chen, Wei-Lun Gao, and Fan-Tien Cheng, “A Cloud-based Pluggable Manufacturing Service Scheme for Smart Factory,” 2018 IEEE International Conference on Automation Science and Engineering (CASE 2018), Munich, Germany, pp. 1040-1045, August 20-24, 2018. [EI]    

[2018] Chao-Chun Chen, Wei-Tsung, Su Min-Hsiung Hung, and Zhong-Hui Lin, “Distributed Map-Reduce-style Job Processing Using Historical Manufacturing Behavior for Edge Devices in Smart Factory,” 2018 IEEE International Conference on Automation Science and Engineering (CASE 2018), Munich, Germany, August 20-24, 2018. [EI]  

[2018] 李坤哲、洪敏雄*、陳朝鈞、蔡昌隆、李志仁,基於可拋棄金鑰資料編碼之雲製造系統新式安全資料傳輸機制,第14屆創新.管理.知識社群國際研討會,台北,台灣,2018年6月2日

[2018] 王丹弘、施毅峰、洪敏雄*遠端嬰兒照護系統之設計與實作,第14屆創新.管理.知識社群國際研討會,台北,台灣,2018年6月2日 

[2018] 黄欣蕾、林丽萍、洪敏雄*、李保安、徐盛軒,基於物聯網技術之遠端家禽圈養系統開發",第14屆創新.管理.知識社群國際研討會,台北,台灣,2018年6月2日 

[2018] C.-C. ChenMin-Hsiung Hung*, P.-Y. Li, Y.-C. Lin,  Y-Y. Liu, and F.-T. Cheng, “A Novel Automated Construction Scheme for Efficiently Developing Cloud Manufacturing Services,” 2018 IEEE International Conference on Robotics and Automation (ICRA 2018), Brisbane, Australia, May 21-25, 2018. [EI] 
***榮獲大會最佳自動化論文決賽入圍(Best Automation Paper Award Finalist)***

[2017] 趙瑜、洪敏雄*基於雲端運算之無線感測網路節點管理與監控平台研發2017企業架構與資訊科技研討會(SEAIT 2017),台北,台灣,2017年11月15日。***榮獲大會最佳論文獎***

[2017]  Y.-C. Lin, M.-H. Hung*, H.-C. Huang, C.-C. Chen, H.-C Yang, Y.-S. Hsieh, and F.-T. Cheng, “Development of Advanced Manufacturing Cloud of Things (AMCoT) - A Smart Manufacturing Platform,” 2017 IEEE International Conference on Automation Science and Engineering (CASE 2017), Xi'an, China, pp. 255-262, August 20-23, 2017. [EI]      ***榮獲大會最佳應用論文獎(Best Application Paper Award)***

[2017]  B. Suryajaya, C.-C. Chen, M.-H. Hung, Y.-Y. Liu, J.-X. Liu, and Y.-C. Lin, “A Fast Large-size Production Data Transformation Scheme for Supporting Smart Manufacturing in Semiconductor Industry,” 2017 IEEE International Conference on Automation Science and Engineering (CASE 2017), Xi'an, China, pp. 275-281, August 20-23, 2017. [EI]  ***榮獲大會最佳應用論文決賽入圍(Best Application Paper Award Finalist)***

[2017] 李龍威、洪敏雄*預測保養雲端服務的設計與實作,第十二屆智慧生活科技研討會 (ILT2017),台中,台灣,201762日。

[2017] 藍建武、陳彥儒、陳齊修、呂建德、林世崧、洪敏雄開發兩棲偵搜無人載具,第13屆知識社群國際研討會(KC 2017),台北,台灣,2017527日。

[2017] 李榮庭、徐佳良、陳奕佐、黃郁勳、藍建武、林世崧、洪敏雄使用多維感測器實現人形機器人簡易自主靜態平衡控制之研究13屆知識社群國際研討會(KC 2017),台北,台灣,2017527日。

[2016] C.-C. Chen, M.-H. Hung, Yu-Chen Lin, and Yun-Chuan Lin, “Secure Data Exchange Mechanism in Hybrid Cloud-based Distributed Manufacturing Systems,” Proceedings of the 2016 IEEE International Conference on Automation Science and Engineering (CASE 2016), Fort Worth, Texas, USA, pp. 1158-1159, August 21-24, 2016. [EI] 

[2016] Y.-C. Lin, M.-H. Hung*, Y.-Y. Liu, Y.-Y. Li, and F.-T. Cheng, “Development of a Novel Automated Model Creation Service based on Cyber-Physical System and Cloud Computing,” Proceedings of the 2016 IEEE International Conference on Automation Science and Engineering (CASE 2016), Fort Worth, Texas, USA, pp. 1166-1167, August 21-24, 2016. [EI] 

[2016] C.-C. Chen, M.-H. Hung, P.-Y. Li, and J.-H. Liu, “Manufacturing System Development Scheme by Using Workflow-based Cloud Manufacturing Framework,” Proceedings of the 2016 IEEE International Conference on Automation Science and Engineering (CASE 2016), Fort Worth, Texas, USA, pp. 1168-1169, August 21-24, 2016. [EI] 

[2016] C.-C. Chen, M.-H. Hung, J.-H. Liu, P.-Y. Li, Y.-C. Lin, and Chih-Jen Lee, “Development of a Cyber-physical-style Continuous Improvement Process Scheme for Manufacturing Industry,” Proceedings of the 2016 IEEE International Conference on Automation Science and Engineering (CASE 2016), Fort Worth, Texas, USA, pp. 1307-1312, August 21-24, 2016. [EI] 

[2016] 莊啓祥、洪敏雄*、周瑞仁、林毓祥、蔡昌隆,“發展基於雲端運算之植物工廠監控系統”,2016數位生活科技研討會(DLT2016),屏東,台灣,第265-269頁,2016年6月18日

[2016] 陳怡廷、洪敏雄*、張耀鴻,“多人雲端環境模擬服務之設計與實作”,2016數位生活科技研討會(DLT2016),屏東,台灣,第277-282頁,2016年6月18日。***榮獲大會佳作論文獎***

[2016] 蔡昌隆、吳仲霖、洪敏雄、陳俊榮、劉仲鑫,“基於802.11i與802.1X之無線網路資訊安全研究”,第12屆知識社群國際研討會(KC 2016),台北,台灣,第161-171頁,2016年5月28日。

[2016] 藍建武、林世崧、洪敏雄、涂建平、張景智、蘇亭玉,“開發導盲輔助帽”,第12屆知識社群國際研討會(KC 2016),台北,台灣,第1049-1056頁,2016年5月28日。

[2016] 林昱丞、王如宏、張雅涵、洪敏雄*、徐盛軒,“雲端寵物自動餵食器之設計與實作”,第12屆知識社群國際研討會(KC 2016),台北,台灣,第1057-1068頁,2016年5月28日。

[2016] 陳彥臣、洪敏雄*、楊泰寧、周立平,“基於虛實整合技術開發智慧工廠資通平台”,第12屆知識社群國際研討會(KC 2016),台北,台灣,1081-1092頁,2016年5月28日。

[2015] Chao-Chun Chen*, M.-H. Hung, Yu-Chuan Lin, and Bo-Yi Li, “Development of a Hybrid- Cloud-based Wheel-Manufacturing Service with Ontology Inference for Machine Tools,” Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering (CASE 2015), Gothenburg, Sweden, pp. 1440-1145,  August 24-28, 2015. [EI]

[2015] Yu-Chuan Lin, M.-H. Hung*, Chun-Fan Wei, and Fan-Tien Cheng, “Development of a Novel Cloud-based Multi-tenant Model  Creation Scheme for Machine Tools,” Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering (CASE 2015), Gothenburg, Sweden, pp. 1448-1149,  August 24-28, 2015. [EI]

[2015] 林世崧、藍建武、楊博勛、張宸熏、李聿茹、洪敏雄競速體感遙控車之設計與實作,第11屆知識社群國際研討會,台北,台灣,2015530日。

[2014] M.-H. Hung*, Yu-Chuan Lin, Chia-Chun Tu, Chun-Fan Wei, and Fan-Tien Cheng, “Development of a Multiuser Model Creation Service for Machine Tools based on Private Cloud,” Proceedings of the 2014 International Conference on Advanced Manufacturing (ICAM 2014),  Chiayi, Taiwan, No. S0074, Sep. 30-Oct. 3, 2014.. 

[2014] C.-C. Chen, M.-H. Hung, Y.-J. Tsai, C.-Y. Lin, “Development of Cloud-based Wheel-Design Process Planning Service with  Ontology Inference for Machine Tools,” Proceedings of the 2014 International Conference on Advanced Manufacturing (ICAM 2014), Chiayi, Taiwan, No. S0071, Sep. 30-Oct. 3, 2014.

[2014] M.-H. Hung*, Y.-C. Lin, H.-C. Huang, C.-C. Tu, and F.-T. Cheng, “Development of a Private Cloud-based New-Generation Virtual Metrology System,” Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering (CASE 2014), Taipei, Taiwan, pp. 910-915, August 18-21, 2014. [EI] 

[2014] H. Tieng, H.-C. Yang, M.-H. Hung, and F.-T. Cheng, “A Multi-Objective Optimization Procedure for Selecting Features of Machining Process,” Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering (CASE 2014), Taipei, Taiwan, pp. 899-904, August 18-21, 2014. [EI]

[2014] C.-C. Chen, Y.-C. Lin, M.-H. Hung, C.-Y. Lin, Y.-J. Tsai, M.-S. Chen, and F.-T. Cheng, “Development of Auto-scaling Cloud Manufacturing Framework for Machine Tool Industry,” Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering (CASE 2014), Taipei, Taiwan, pp. 893-898, August 18-21, 2014. [EI]

[2013] C.-C. Chen, M.-H. Hung, C.-Y. Lin, Y.-J. Tsai, H.-C. Yang, R.-S. Lee, and F.-T. Cheng, “Development of Ontology Inference Cloud Service for Machine Tools,” Proceedings of the 12th International Conference on Automation Technology (Automation 2013), Yong-Kang,Tainan, Taiwan, Nov. 1-3, 2013.

[2013] M.-H. Hung*, Y.-C. Lin, H.-C. Huang, M.-H. Hsieh, H.-C. Yang, and F.-T. Cheng, “Development of an Advanced Manufacturing Cloud for Machine Tool Industry based on AVM Technology,” Proceedings of the 2013 IEEE Conference on Automation Science and Engineering (CASE 2013), Madison Wisconsin, USA, pp. 195-200, August 17-21, 2013. [EI]

[2013] H. Tieng, H.-C. Yang, M.-H Hung, and F.-T. Cheng, “A Novel Virtual Metrology Scheme for Predicting Machining Precision of Machine Tools,” Proc. of 2013 IEEE International Conference on Robotics and Automation (ICRA 2013), Karlsruhe, Germany, pp. 264-269, May 6-10, 2013. [EI]  ***榮獲大會最佳自動化論文獎(Best Automation Paper Award)***

[2012] 賴佳瑋、洪敏雄*基於雲端運算之無線電力監控系統設計與實作, 2012彰雲嘉大學校院聯盟學術研討會,嘉義,台灣,D1-D6頁, 2012127日。

[2012] 游明哲、藍建武、林世崧、陳炳男、洪敏雄*“發展可用於ZigBee監控系統之智慧型閘道器”,第21屆國防科技學術研討會,桃園,台灣,第D1-D6頁,2012年11月18日。

[2012] 林世崧,林宗韋,洪敏雄*,“開發具備老人運動安全考量之遠端居家照護系統”,2012第20屆全國自動化科技研討會論文集,臺灣,桃園,長庚大學,論文編號:112,2012年11月2日~3日。

[2012] 洪敏雄*,林祐全,孫瑋志,鄭芳田,基於雲端運算發展具備預測能力之設備監控平台,2012第20屆全國自動化科技研討會論文集,臺灣,桃園,長庚大學,論文編號:108, 2012年11月2日~3日。 

[2012] H.-C. Yang, T.-H. Tsai, C.-Y. Chao, M.-H. Hung, and F.-T. Cheng, “A Dual-Forecast Scheme for Production Output with Paired/Unpaired WIP Data,” Proceedings of the 8th annual IEEE Conference on Automation Science and Engineering (CASE 2012, Seoul, Korea, pp. 577-532, August 20-24, 2012.  [EI]

[2012] M.-H. Hung*, Y.-C. Lin, T. Q. Huy, H.-C. Yang, and F.-T. Cheng, “Development of a Cloud-Computing-based Equipment Monitoring System for Machine Tool Industry,” Proceedings of the 8th annual IEEE Conference on Automation Science and Engineering (CASE 2012), Seoul, Korea, pp. 958-963, August 20-24, 2012.  [EI]

[2012] H.-C. Yang, H. Tieng, Y.-Y. Li, M.-H. Hung, and F.-T. Cheng, “A Virtual-Metrology-Based Machining State Conjecture System,” Proceedings of the 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (IEEE/ASME AIM 2012), KaoHsiung, Taiwan, pp. 462-466, July 11-14, 2012. [EI]

[2012] M.-H. Hung*, C.-F. Chen, Y.-C. Lin, M.-Y. Chou, and F.-T. Cheng, “Refinement of Kernel and Functional Mechanisms for Automatic Virtual Metrology System,” Proceedings of the 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (IEEE/ASME AIM 2012), KaoHsiung, Taiwan, pp. 472-477, July 11-14, 2012. [EI]

[2012] W.-M. Wu, F.-T. Cheng, and M.-H. Hung, “Preliminary Study of a Dynamic-Moving-Window Scheme for Virtual-Metrology Model Refreshing,” Proceedings of the 2012 IEEE International Conference on Robotics and Automation (ICRA 2012), St. Paul, Minnesota, USA, pp. 5044-5049, May 14-18, 2012. [EI]

[2012] H.-C. Yang, K.-J. Liu, M.-H. Hung, and F.-T. Cheng, “Drill-Path Optimization with Time Limit and Thermal Protection,” Proceedings of the International Conference on Advanced Manufacturing (ICAM 2012), Jiaoxi, Yilan, Taiwan, No. S0039, March 4-8, 2012.

[2012] M.-H. Hung*, Y.-C. Lin, H.-C. Yang, and F.-T. Cheng, “New Intelligent Equipment Monitoring Architecture based on Cloud Computing,” Proceedings of the International Conference on Advanced Manufacturing (ICAM 2012), Jiaoxi, Yilan, Taiwan, No. S0041, March 4-8, 2012. 

[2012] M.-H. Hung*, Y.-C. Lin, L.-W. Huang, H.-C. Yang, and F.-T. Cheng, “New e-Manufacturing Framework based on Cloud Computing,” Proceedings of the International Conference on Advanced Manufacturing (ICAM 2012), Jiaoxi, Yilan, Taiwan, No. S0033, March 4-8, 2012.  

[2011] 鍾子賢、洪敏雄*、林世崧、陳炳男基於Z-Stack發展遠端監控系統20屆國防科技學術研討會,桃園,台灣,607~61220111118日。

[2011] 吳雅慧、洪敏雄*、林世崧、藍建武運用無線感測網路開發電能監控系統之研究20屆國防科技學術研討會,桃園,台灣,575~58020111118日。

[2011] M.-H. Hung*, C.-W. Lan, and Y.-H. Wu, “Development of a Generic Equipment Monitoring Information Platform using Could Computing,” Proceedings of the 11th International Conference on Automation Technology (Automation 2011), Douliou, Yunlin, Taiwan, Paper No. L009, Nov. 18-20, 2011. 

[2011] M.-H. Hung*, Y.-C. Lin, S.-H. Li, H.-C. Yang, and F.-T. Cheng, “Development of a Production-Planning Data Exchange Platform for the TFT-LCD Industry,” Proceedings of the 11th International Conference on Automation Technology (Automation 2011), Douliou, Yunlin, Taiwan, Paper No. L001, Nov. 18-20, 2011. 

[2011] M.-H. Hung*, J.-Y. Cheng, P.-N. Chen, and S.-S. Lin, “Development of a ZigBee-based Distributed Power Monitoring and Control Platform with Easy-Deployment and Flexible-Extension Considerations,” Proceedings. of the first International Conference on Instrumentation & Measurement, Computer, Communication and Control (IMCCC2011), Beijing, China, pp. 345-348, October 21-23, 2011.  [EI]

[2010] 沈忠飛、黃國祥、蔡昌隆、洪敏雄使用BSM稽核UNIX主機作業系統資訊安全技術創新應用研討會論文集,中國文化大學,台北,台灣,42~47頁,20101224日。

[2010] 林世崧、吳明修、洪敏雄運用主動式無線射頻識別技術於財產管理之研究19屆國防科技學術研討會論文集,桃園,台灣,553~560頁,20101119日。

[2010] 林世崧、溫佳穎、洪敏雄RFID應用系統之安全機制研究19屆國防科技學術研討會論文集,桃園,台灣,481~488頁,20101119日。

[2010] H.-C. Yang, Y.-L. Chen, M.-H. Hung, and F.-T. Cheng, “Virtual Production Control System,” Proceedings of the 6th annual IEEE Conference on Automation Science and Engineering (CASE 2010), Toronto, Ontario, Canada, pp. 985-989, August 21-24, 2010. [EI]

[2010] M.-H. Hung*, H.-C. Huang, and F.-T. Cheng, “Development of an Automatic Virtual Metrology Framework for TFT-LCD Industry,” Proceedings of the 6th annual IEEE Conference on Automation Science and Engineering (CASE 2010), Toronto, Ontario, Canada, pp. 879-884, August 21-24, 2010.  [EI]

[2010] 陳炳男洪敏雄*,林祐全,發展植基於無線感測網路之軍事庫房監控系統201018屆全國自動化科技研討會論文集,臺灣,桃園,中原大學,803~810頁,2010625~26日。 
 ***榮獲大會自動化類最佳論文佳作***

[2010] 吳思緯,洪敏雄*具安全性考量之半導體工程鏈管理系統服務管理機制201018屆全國自動化科技研討會論文集,臺灣,桃園,中原大學,665~672頁,2010625~26日。 

[2010] 吳晨弘,洪敏雄*,李世豪,林浩德,鄭芳田,以服務導向為基礎發展虛擬生產管制系統資料交換平台201018屆全國自動化科技研討會論文集,臺灣,桃園,中原大學,658~664頁,2010625~26日。

[2010] M.-H. Hung*, S.-S. Lin, J.-Y. Cheng, and W.-L. Chien, “A ZigBee Indoor Positioning Scheme using Signal-Index-Pair Data Preprocess Method to Enhance Precision,” Proceedings of 2010 IEEE International Conference on Robotics and Automation (ICRA 2010), Anchorage, Alaska, USA, pp. 548-553, May 3-8, 2010.  [EI]

[2009] 陳炳男洪敏雄* 林祐全、林世崧運用無線感測網路技術發展校園室內照明設備診斷與監控系統18屆國防科技學術研討會論文集,台灣、龍潭、渴望園區學習中心,第681-686頁,20091127

[2009] W.-M. Wu, F.-T. Cheng, T.-H. Lin, D.-L. Zeng, J.-F. Chen, and M.-H. Hung, “Advanced Studies of Selection Schemes for Dual Virtual-Metrology Outputs,” Proceedings of 2009 IEEE International Conference on Automation Science and Engineering (CASE 2009), Bangalore, India, pp. 421-426, August 22-25, 2009. [EI]

[2009] 君偉、陳炳南、洪敏雄*“ZigBee無線感測網路技術之網路式診斷與維護通用型架構 2009資通技術管理與應用研討會,臺灣,高雄,樹德科技大學,2009612日。

[2009] M.-H. Hung*, S.-W. Wu, T.-L. Wang, and F.-T. Cheng,Development of an Efficient Web-Services-based Data Exchange Scheme for Semiconductor Engineering Chain,” Proceedings of the 10th International Conference on Automation Technology (Automation 2009), Tainan, Taiwan, pp. 289-294, June 27-29, 2009. 

[2009] S.-S. Lin, M.-H. Hung*, and T.-S. Chio, “RFID-based Remote Healthcare Architecture with Ease-of-Use Considerations,” The 10th International Conference on Automation Technology (Automation 2009), Tainan, Taiwan, pp. 228-233, June 27-29, 2009.

[2009] W. Tann, C.-H. Ku, S.-W. Wu, F.-T Cheng, and M.-H. Hung, “Enable the Interface A Like Module with Interoperability among Heterogeneous Systems,” The 10th International Conference on Automation Technology (Automation 2009), Tainan, Taiwan, pp. 191-196, June 27-29, 2009.

[2009] S.-W. Wu, M.-H. Hung*, J.-J. Siao, F.-T. Cheng, W. Tann, and C.-H. Kuo, “SOA-based System Data Exchange Architecture with Generic Communication Interfaces,” The 10th International Conference on Automation Technology (Automation 2009), Tainan, Taiwan, pp. 100-105, June 27-29, 2009. 
***榮獲大會最佳自動化論文獎(Best Automation Paper Award)***

[2008] Y.-T. Huang, F.-T. Cheng, and M.-H. Hung, “Developing a Product Quality Fault Detection Scheme,” 2009 IEEE International Conference on Robotics and Automation, Kobe, Japan, pp. 927-932, May 12-17, 2009. [EI]

[2008] 陳炳男洪敏雄*、蘇效賢、陸儀斌,新一代資訊分享分析系統架構設計17屆國防科技學術研討會,台灣、龍潭、渴望園區學習中心,851~858頁,20081127日。

[2008] 陳炳男、蘇效賢、洪敏雄*、吳晨弘,國軍資訊分享分析中心即時警示系統之設計與實作17屆國防科技學術研討會,台灣、龍潭、渴望園區學習中心,505~512頁,20081127日。

[2008] 林世崧洪敏雄*、邱敬發,發展以RFID為基礎之財產管理系統17屆國防科技學術研討會,台灣、龍潭、渴望園區學習中心,439~446頁,20081127日。

[2008] 林世崧洪敏雄*君偉、吳思緯、邱敬發,運用RFID技術開發具備自動服務功能的遠距照護架構200816屆全國自動化科技研討會論文集,臺灣,高雄第一科技大學,535~541頁,2008627~28日。

[2008] 王宗立、洪敏雄*、范盛維、鄭芳田,發展一個半導體工程鏈資料交換架構200816屆全國自動化科技研討會論文集,臺灣,高雄第一科技大學,93~99頁,2008627~28日。
***榮獲大會自動化最佳論文入圍獎***

[2008] T.-H. Lin, F.-T. Cheng, A.-J. Ye, W.-M. Wu, and M.-H. Hung,A Novel Key-variable Sifting Algorithm for Virtual Metrology,” Proceedings of 2008 IEEE International Conference on Robotics and Automation, Pasadena, California, USA, pp. 3636-3641, May 19-23, 2008.  [EI]

[2007] 江信志、林世崧洪敏雄*,運用無線射頻識別技術開發國軍械彈管理監控系統,”16屆國防科技學術研討會論文集,台灣、龍潭、渴望園區學習中心,第4-80~4-87頁,20071130日。

[2007] J.-Y. Cheng, M.-H. Hung*, and J.-W. Chang,A ZigBee-Based Power Monitoring System with Direct Load Control Capabilities,” 2007 IEEE International Conference on Networking, Sensing, and Control, London, UK, pp. 895-900, April 15-17, 2007. [EI]

[2006] 張仁偉、鄭瑞裕、洪敏雄*, “一個基於ZigBee技術之電力品質監測系統,” 中華民國第27屆電力工程研討會論文集, 臺灣, 新竹, OD3.4.1-OD3.4.5, 20061222~23日。

[2006] 賴丁榮、洪敏雄*、江信志、周青陸、蔡尚源, ”結合無線射頻識別技術開發飛彈組測管控資訊平台,” 95年度國防科技學術合作計畫成果發表會論文集, 台灣、龍潭、渴望園區學習中心,第H25-H31頁,20061130日。

[2006] 俞齊山、郭智賢、洪敏雄、翁睿謙, ”微飛行器飛控系統在嵌入式控制器之設計與實現之研究,” 95年度國防科技學術合作計畫成果發表會論文集, 台灣、龍潭、渴望園區學習中心,第A21-A25頁,20061130日。

[2006] 陳鵬宇、鄭瑞裕、洪敏雄*、鄭芳田, ”發展具有隨插即用能力之電力監測系統,” 200614屆全國自動化科技研討會論文集, 臺灣, 彰化, 建國科技大學, E45-E50, 200662~3日。

[2006] 鄭瑞裕、王偉澔、江信志、賴丁榮、柯理格、羊建銘、洪敏雄*, ” e化水族箱,” 200614屆全國自動化科技研討會論文集, 臺灣, 彰化, 建國科技大學, E40-E44, 200662~3日。

[2006] 王宗立、洪敏雄*、鄭芳田, ” 半導體工程鏈系統架構,” 200614屆全國自動化科技研討會論文集, 臺灣, 彰化, 建國科技大學, A55-A60, 200662~3日。

[2006] 顏明珠、羊建銘、洪敏雄*, ” 具主動推播能力之遠端監控架構,” 200614屆全國自動化科技研討會論文集, 臺灣, 彰化, 建國科技大學, A40-A45, 200662~3日。

[2006] T.-H. Lin, M.-H. Hung, R.-C. Lin, and F.-T. Cheng,A Virtual Metrology Scheme for predicting CVD Thickness in Semiconductor Manufacturing,” in Proceedings of 2006 IEEE International Conference on Robotics and Automation, Orlando, Florida, USA, pp. 1054-1059, May 2006.  [EI]

[2006] M.-H. Hung*, Y.-T. Chen, R.-W. Ho, and G. Chen,Development Scheme of SoPC-Based Reconfigurable Controllers,” in Proceedings of 2006 IEEE International Conference on Networking, Sensing, and Control, Ft. Lauderdale, Florida, USA, pp. 492-497, April 23-25, 2006. [EI]

[2005] 陳永得、洪敏雄*,植基於可規程系統單晶片之控制器設計與實現,”14屆國防科技學術研討會論文集,台灣、龍潭、渴望園區學習中心,第557-562頁,20051124~25日。

[2005] 鍾志煌、洪敏雄*陳永得、彭新晏、吳錦長、張恆豪,高功率發射機智慧型監控系統研發,”14屆國防科技學術研討會論文集,台灣、龍潭、渴望園區學習中心,第534-539頁,20051124-25日。

[2005] 李家錚、鄭瑞裕、洪敏雄*,應用RFID技術於國軍後勤補給作業之開發與研究,”14屆國防科技學術研討會論文集,台灣、龍潭、渴望園區學習中心,第433-438頁,20051124~25日。

[2005] 謝永茂王晚成、陳 功、洪敏雄,線型永磁式同步馬達智慧型控制系統之設計與研究,” 2005自動控制研討會論文集,臺灣、台南,20051118-19日。

[2005] Y.-C. Su, M.-H. Hung, F.-T. Cheng, and T.-P. Lee, “Development of a Data Pre-processing Scheme and Pluggable Application Modules for an Intelligent Equipment Prognostics System,” in Proceedings of the 3rd International IEEE Conference on Industry Informatics (INDIN 2005), Perth, Western Australia, pp. 38-43, August 2005.  [EI]

[2005] Y.-C. Su, F.-T. Cheng, M.-H. Hung, Y.-C. Lin, and R.-C. Lin, “Design and Implementation of an Intelligent Prognostics System,” in Proceedings of 2005 IEEE International Conference on Automation Science and Engineering, Edmonton, Alberta, Canada, pp. 273-278, August 2005.  [EI]

[2005] M.-H. Hun*g, F.-Y. Hsu, T.-L. Wang, F.-T. Cheng, R. Lai, and T. Huang, “A Secure Collaborative e-Diagnostics Framework for Semiconductor Factories,” in Proceedings of 2005 IEEE International Conference on Automation Science and Engineering, Edmonton, Alberta, Canada, pp. 185-190, August 2005.[EI]

[2004] Y.-C. Su, F.-T. Cheng, G.-W. Huang, M.-H. Hung, and T. Yang, "A Quality Prognostics Scheme for Semiconductor and TFT-LCD Manufacturing Processes," in Proceedings of The 30th Annual Conference of the IEEE Industrial Electronics Society (IECON 2004), Busan, Korea, pp. 1972-1977, November 2004.  [EI]

[2004] M.-H. Hung*, R.-W. Ho, and F.-T. Cheng, “An e-Diagnostics Framework with Security Considerations for Semiconductor Factories,” in Proceedings of IEEE 2004 Semiconductor Manufacturing Technology Workshop (SMTW 2004), HsinChu, Taiwan, pp. 37-40, September 9-10, 2004. 

[2004] 蘇育全、鄭芳田、黃國偉、洪敏雄、楊大和,一種品質預測架構,”2004年第13屆全國自動化科技研討會論文集,臺灣、台北、國立台北科技大學,2004617-18日。

[2004] 陳冠宇、何瑞文、洪敏雄*,具安全考量之半導體工廠網路式診斷暨保養架構,”2004年第13屆全國自動化科技研討會論文集,台北、國立台北科技大學,2004617~18日。

[2004] F.-T. Cheng, G.-W. Huang, C.-H. Chen, and M.-H. Hung, “A Generic Embedded Device for Retrieving and Transmitting Information of Various Customized Applications,” in Proceedings of 2004 IEEE International Conference on Robotics and Automation, New Orleans, LA, USA, pp. 978-983, April 2004. [EI]

[2004] M.-H. Hung*, K.-Y. Chen, and S.-S. Lin, “Development of A Web-Services-based Remote Monitoring and Control Architecture,” in Proceedings of 2004 IEEE International Conference on Robotics and Automation, New Orleans, LA, USA, pp. 1444-1449, April 2004. (NSC 91-2212-E-014-011) [EI]

[2003] 王長明, 洪敏雄*, 陳冠宇, 林世崧, 何瑞文, “具機動管理能力之電力監測系統,” 12屆國防科技學術研討會論文集, 桃園大溪, 中正理工學院, 95~104, 200311.

[2003] 何瑞文, 洪敏雄*, 陳冠宇, “網路式診斷系統資訊整合架構之開發,” 12屆國防科技學術研討會論文集, 桃園大溪, 中正理工學院, 77~86, 200311.

[2003] 林世崧, 洪敏雄*, 陳冠宇, 王長明, “以網路服務為基礎之遠端監控系統架構,” 12屆國防科技學術研討會論文集, 桃園大溪, 中正理工學院, 57~66, 200311.

[2003] M.-H. Hung*, R.-J. Huang, and F.-T. Cheng, “Development of an e-Diagnostics System for Semiconductor Equipment Using Data Mining and Ontology,” in The Seventh International Conference on Automation Technology (Automation 2003), Chia-Yi, Taiwan, R.O.C., pp. 37-42, September 2003. 

[2003] M.-H. Hung*, S.-C. Yeh, and F.-T. Cheng, “Development of a Web-services-based e-Diagnostics Framework,” in Proceedings of 2003 IEEE International Conference on Robotics and Automation, Taipei, Taiwan, R.O.C., pp. 596-603, September 2003. [EI]

[2002] M.-H. Hung*, C.-H. Tsai, F.-T. Cheng, and H.-C.Yang, “A Novel Ethernet-Based Equipment Integration Framework for Factory Automation,” in Proceedings of 2002 IEEE International Conference on Robotics and Automation, Washington D. C., U.S.A., pp. 781-786, May 2002.  [EI]

[2001] F.-T. Cheng, H.-C. Yang, J.-Y. Lin, and M.-H. Hung, "The Development of Holonic Information Coordination Systems with Security Considerations and Error-Recovery Capabilities," in Proceedings of 2001 IEEE International Conference on Robotics and Automation, Seoul, Korea, pp. 1832-1838, May 2001.  [EI]

[2001] M.-H. Hung, D. E. Orin, “Dynamic Simulation of Actively-Coordinated Wheeled Vehicle Systems on Uneven Terrain,” in Proceedings of 2001 IEEE International Conference on Robotics and Automation, Seoul, Korea, pp. 779-786, May 2001. [EI]

[2001] M.-H. Hung*, J.-S. Leu, and C.-H. Kuo, “Optimal Force Control for Actively-Coordinated Wheeled Vehicles,” in Proceedings of 2001 National Automatic Control Conference, Tao-Yuan, R.O.C., pp. 373-378, March 2001.

[2000] F.-T. Cheng, C.-W. Chen, and M. H. Hung, “Redundancy Indices of Kinematically Redundant Manipulators” in Proceedings of 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation, Nagoya, Aichi, Japan, pp. 572-577, October 22 – 28, 2000.  [EI]

[1999] 洪敏雄*, 王耀明, 王嘉樹, 孫龍生, 盧樹台, “配線訓練自動評分系統,” 8屆國防科技學術研討會論文集, 桃園大溪, 中正理工學院, 19991120.

[1999] M.-H. Hung, D. E. Orin and K. J. Waldron, “Force Distribution Equations for General Tree-Structured Robotic Mechanisms with a Mobile Base,” in Proceedings of 1999 IEEE International Conference on Robotics and Automation, Detroit, Michigan, U.S.A., pp. 2711-2716, May 1999. [EI]

 

 

專利(Patents)

專利類別

專利名稱

專利國家

專利號碼

專利發明人

發明專利 雲製造服務的自動建置方法、電腦程式產品、雲製造系統 中華民國 107109885

陳朝鈞、洪敏雄
李柏儀、林祐全、
劉育瑒、李珮甄、
鄭芳田

發明專利 GFRAMEWORK OF CLOUD SERVICE FOR BIOLOGICAL GROWT 美國 US7,162,394B2

周瑞仁、洪敏雄
林世崧、林銘彥

發明專利

工具機之加工品質的預測方法

中華民國

I481978

楊浩青, 丁顥,

洪敏雄, 鄭芳田

發明專利

可擷取和傳送客製化應用資訊的通用型嵌入式裝置與方法

中華民國

I225606

鄭芳田黃國偉,

陳俊宏洪敏雄

發明專利

生產製程之品質預測系統與方法

中華民國

I267012

鄭芳田蘇育全,

黃國偉洪敏雄

發明專利

Generic Embedded Device and Mechanism Thereof for Various Intelligent-Maintenance Applications

美國

US7,162,394B2

Fan-Tien Cheng,

Guo-Wei Huang,

Chun-Hung Chen,

Min-Hsiung Hung

發明專利

Quality Prognostics System and Method for Manufacturing Process

美國

US7,493,185B2

Fan-Tien Cheng,

Yu-Chuan Su,

Guo-Wei Huang,

Min-Hsiung Hung

發明專利

Generic Embedded Device and Mechanism Thereof for Various Intelligent-Maintenance Applications

日本

特許第4303640

Fan-Tien Cheng,

Guo-Wei Huang,

Chun-Hung Chen,

Min-Hsiung Hung

發明專利

Quality Prognostics System and Method for Manufacturing Process

日本

Pending (2005-162989)

Fan-Tien Cheng,

Yu-Chuan Su,

Guo-Wei Huang,

Min-Hsiung Hung

 
 

研究計畫(Research Projects)

計畫名稱

補助單位

負責職務

執行期間

狀態

具備持續整合交付與巨量資料處理能力之新一代虛擬量測服務平台 (MOST 108-2221-E-034-015-MY2)

科技部 持人

2019/08/01~

2021/07/31

執行中

  基於容器技術之先進製造物聯雲(1/3)

  (MOST 107-2218-E-006-055)

科技部 共同主持人暨分項計畫一
主持人

2018/12/01~

2019/11/30

執行中

基於容器虛擬化技術與微服務之新一代智慧製造服務平台

(MOST 107-2221-E-034-013)

科技部 持人

2018/08/01~

2019/07/31

已結案

先進製造物聯雲(3/3)

(MOST 107-2218-E-006-005)

科技部

共同主持人暨分項計畫一
主持人

2018/03/01~

2019/05/31

已結案

基於虛實整合技術開發智慧製造服務平台

(MOST 106-2221-E-034-014)

科技部 持人

2017/08/01~

2018/7/31

已結案

先進製造物聯雲(2/3)

(MOST 106-2218-E-006-005)

 科技部 共同主持人暨分項計畫一
主持人

2017/03/01~

2018/04/30

已結案

發展基於虛實整合技術之雲端自動化建模服務

(MOST 105-2221-E-034-002)

科技部

持人

2016/08/01~

2017/10/31

已結案

結合行動情境感知與本體論技術的個人化旅遊景點推薦系統

(MOST 105-2221-E-218-037)

科技部

共同主持人

2016/08/01~

2017/07/31

已結案

先進製造物聯雲(1/3)

(MOST 105-2218-E-006-014)

  科技部

 共同主持人暨分項計畫一
主持人

2016/03/01~

2017/02/28

已結案

 使用巨量資料處理技術建置刀具可用性分析系統

產學合作計畫

 共同主持人

2015/12/01~

2016/11/30

已結案

基於私有雲發展全自動虛擬量測之多租戶建模服務

(MOST 104-2221-E-034-003)

科技部

主持人

2015/08/01~

2016/09/30

已結案

i.EDU–創新力教育平台--海角實驗室-創意機電工程實驗資源跨校整合與共享

(MOST 102-2511-S-002-014-MY3)

 

   科技部

 

 共同主持人

 

2013/12/01~

2016/11/30

 

 已結案

先進製造物聯雲

(MOST 104-3011-E-006-001)

科技部

共同主持人暨分項計畫一
主持人

2015/05/01~

2016/03/31

已結案

先進發展基於私有雲技術之新一代虛擬量測平台

(MOST 103-2221-E-034-012)

科技部

主持人

2014/08/01~

2015/10/31

已結案

智慧型製造雲 (II) (III)

(MOST 102-2218-E-006-009-MY2)

科技部

共同主持人暨分項計畫二
主持人

2013/08/01~

2015/10/31

已結案

智慧型製造雲 (I)

國科會

共同主持人暨分項計畫二
主持人

2012/09/01~

2013/07/31

已結案

 

發展應用雲端運算之通用型設備監控資訊平台

國科會

主持人

2012/08/01~

2013/07/31

已結案

 

發展應用雲端運算之通用型設備監控資訊平台

國科會

主持人

2011/08/01~

2012/07/31

已結案

雲端運算通用型預測系統

國科會

共同主持人

2010/08/01~

2011/07/31

已結案

 

發展應用雲端運算之通用型設備監控資訊平台

國科會

主持人

2010/08/01~ 2011/07/31

已結案

發展植基於ZigBee、數位訊號處理與網路服務技術之無線電力監控系統 

國科會

主持人

2009/08/01~ 2010/07/31

已結案

學界科專計畫:虛擬生產管制系統前瞻技術研發二年計畫 

經濟部

共同主持人

2009/08/01~ 2011/07/31

已結案

無線感測器控制軟體研製

中山科學

研究院

主持人

2006/06/01~ 2009/11/30

已結案

產學合作計畫:虛擬量測自動化架構與管理系統研發

國科會

共同主持人

2009/01/01~ 2009/12/31

已結案

產學合作計畫:虛擬量測自動化架構與管理系統研發

國科會

共同主持人

2007/11/01~ 2008/12/31

已結案

機械固力與自動化學門E化製造技術應用之現況國外參訪計畫

國科會

主持人

2008/08/01~ 2008/09/30

已結案

發展半導體工程鏈管理系統-子計畫二:工程鏈管理系統資料交換機制之設計與實作

國科會

主持人

2006/08/01~ 2009/07/31

已結案

利用RFID技術建置理工學院財產管理系統之研究

國防大學

理工學院

主持人

2008/01/01~ 2008/12/31

已結案

產學合作計畫:設備工程系統之設計與實作

國科會

共同主持人

2006/03/01~ 2007/07/31

已結案

中正理工學院校園網路式電力監測系統之開發 (II)

國防大學

中正理

工學院

主持人

2007/01/01~ 2007/12/31

已結案

軍事科技之微飛行器系統開發應用於戰術與戰略之研究-子計畫六:微飛行器飛控系統在嵌入式控制器之設計與實現之研究 

國科會

共同主持人

2006/01/01~ 2006/12/31

已結案

中正理工學院RFID-Based門禁暨槍械管制自動化系統開發研究

國防大學

中正理

工學院

主持人

2006/01/01~ 2006/12/31

已結案

結合無線射頻識別技術開發飛彈組測管控資訊平台之研究 

國科會

主持人

2006/01/01~ 2006/12/31

已結案

發展半導體機台網路式診斷與預防保養系統-子計畫二:半導體機台網路式診斷與預防保養功能架構之設計與實作

國科會

主持人

2005/08/01~ 2006/07/31

已結案

產學合作計畫:智慧型預測保養系統之設計與實作

國科會

共同主持人

2005/03/01~ 2006/04/30

已結案

中正理工學院校園網路式電力監測系統之開發 (I)

國防大學

中正理

工學院

主持人

2005/01/01~ 2005/12/31

已結案

發展半導體機台網路式診斷與預防保養系統-子計畫二:半導體機台網路式診斷與預防保養功能架構之設計與實作

國科會

主持人

2004/08/01~ 2005/08/31

已結案

產學合作計畫:智慧型預測保養系統之設計與實作

國科會

共同主持人

2004/03/01~ 2005/02/28

已結案

高功率發射機智慧型監控系統研發

國科會

主持人

2004/01/01~ 2004/12/31

已結案

發展半導體機台網路式診斷與預防保養系統-子計畫二:半導體機台網路式診斷與預防保養功能架構之設計與實作

國科會

主持人

2003/08/01~ 2004/07/31

已結案

發展以網站服務為基之電子診斷資訊整合架構之先期研究 

國科會

主持人

2002/08/01~ 2003/07/31

已結案

具互動機制之輕兵器射擊訓練模擬器研製

國科會

共同主持人

2002/01/01~ 2002/12/31

已結案

發展具服務品質保證以代理人為基之工廠自動化設備整合架構 

國科會

主持人

2001/08/01~ 2002/07/31

已結案

網路式電子自動化圖形控制器之開發

研華股份

有限公司

共同主持人

2001/08/01~ 2002/07/31

已結案

低品質影像序列的物體偵測方法研究

中山科學

研究院

主持人

2001/04/01~ 2001/12/31

已結案

飛彈尋標器之系統識別 

國科會

主持人

2001/01/01~ 2001/12/31

已結案

多餘自由度機械臂裕度量化指標之研發

國科會

主持人

2000/11/01~ 2001/07/31

已結案

TOP 

最後更新日期: October 4, 2019.

 
瀏覽數  
將此文章推薦給親友
請輸入此驗證碼